This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

KS C IEC 61643-31

Field Electrical/Electronics (C) > Electrical and electronic general
applied area This standard applies to surge protective devices (SPDs) to protect against surges from the direct or indirect effects of lightning or other transient overvoltages. The surge protective device is designed for connection to the DC side of solar power plants rated up to 1 500 V DC. This device contains at least one nonlinear element and is used to limit surge voltage and divert surge current. Performance characteristics, safety requirements, standard test methods and rated values ​​are identified. SPDs that comply with this standard must be installed only on the DC side of solar generators and on the DC side of inverters. SPDs for PV systems equipped with energy storage devices (e.g. batteries, capacitor banks) were not addressed. SPD (referred to as a 2-port SPD according to IEC 61643-11:2011), which has separate input and output terminals and includes a specific series impedance between these terminals, was not covered. SPDs conforming to this standard are designed to be permanently connected and, therefore, such fixed SPDs can only be disconnected and disconnected using tools. This standard does not apply to portable SPDs. Remark 1 SPDs for PV facilities generally do not include a specific series impedance between input/output terminals in consideration of power efficiency. Remark 2 In this standard, when referring to an electric power system or power system, it refers to the DC side of solar power generation facilities.
Standard name (English) Low-voltage surge protective devices — Part 31: Requirements and test methods for SPDs for photovoltaic installations
International Standard Classification (ICS) code

29.240.01: Power supply chain general

29.240.10: Substation. surge prevention device

Compliance with international standards

IEC 61643-31:2018(IDT)

※ IDT: Match, MOD: Modify, NEQ: Not match
Notification agency (notification number) National Agency for Technology and Standards (No. 2021-0387)
Reason for notice Standardization according to international standards
KS screening standards
published date situation Screening criteria file reason
There is no KS screening criteria information.
number of pages 52

History information

standard number standard name Announcement date situation Reason for notice note
KS C IEC 61643-31 View Details Low-voltage surge protective devices — Part 31: Requirements and test methods for SPDs for solar power plants 2021-09-28 Establishment (standard) Standardization according to international standards

Use coupon code WELCOME10 for 10% off your first order.

Cart

Congratulations! Your order qualifies for free shipping You are ₩200 away from free shipping.
No more products available for purchase